Skip to content
Winnipeg & surrounding communitiesWinnipeg, MB

Winnipeg landscape planning tools

Sod price
estimator

Turn measured lawn area into a piece count and a budget for delivery, preparation and installation.

Overhead shot of a lawn with curved paving around its edge.
An aerial view of sod following the curve of a paved terrace

Use your measurements.

Start with the grass area in square feet. Include waste, soil, delivery and removal only where those lines apply.

Sod Installation Cost Calculator

Estimate sod pieces, pallets, topsoil, and a realistic Winnipeg-style installed price range for 2026.

Project Details

Enter your lawn size and choose the conditions that best match the project.

Assumptions used by this calculator: 1 sod piece = 10 sq ft, 1 pallet = 70 pieces = 700 sq ft.
Estimated Total
$0
Fill in your project details and click calculate.
Orderable sod area0 sq ft
Sod pieces needed0
Pallets needed0
Topsoil needed0 yd³
Sod material$0
Install labour / prep$0
Topsoil$0
Starter fertilizer$0
Delivery$0
Pallet deposits$0
Removal / disposal$0
Extras$0
This tool gives a budgeting estimate, not a final quote. Final pricing can change based on access, drainage issues, buried obstacles, soil condition, timing, and exact delivery logistics.

How this calculator works

  • It adds waste to your measured lawn area for trimming and off-cuts.
  • It converts that area into sod pieces and pallets.
  • It calculates topsoil using: square feet × depth in inches ÷ 324.
  • It builds a project total from sod, labour, topsoil, fertilizer, delivery, disposal, and extras.

The calculator applies the waste-adjusted area to sod pieces, installation, topsoil and fertilizer. Its installed pricing guide gives separate ranges by site condition.

Measure the grass that you plan to replace.

A front lawn with beds and a walk is easier to measure in sections. Count the planted islands separately.

Split the lawn into shapes

Measure the biggest rectangles first. Add smaller runs by a fence or side gate and subtract hard surfaces and beds.

Allow for the edges

Waste accounts for cutting pieces near curves, corners and utility covers. Keep the site measurements and the waste percentage separate.

Confirm the prep allowance

Record old grass, exposed soil and uneven areas. Bring photos where the lawn needs levelling or water collects.

Project photographs

From prepared soil to fresh sod

The earlier photo shows the grading and bed layout. The completed view shows the new sod following the same planting edges.

Levelled soil and a curved planting strip in front of a grey-stone bungalow
Prepared soil
New sod carried to the driveway and curved planting strip in front of the same bungalow
Fresh sod
A separate site at the soil preparation stage with layout marks on exposed ground.
A separate site at the soil preparation stage with layout marks on exposed ground.

The soil stage

On this separate site, layout marks are visible while the soil is exposed. A grade and soil check before laying the turf helps the lawn meet the walk at the right height.

Finished front lawn shaped around a mature tree and planted island
Finished front lawn shaped around a mature tree and planted island.

Sod that follows the garden

The mature tree and bed define an edge the sod needs to follow. Measure the turf beyond it and keep the bed outside the area you enter.

Questions worth asking.

Does a piece count include the labour?

The result breaks out pieces and their unit price. Enter a labour or preparation rate where you want the estimate to include those costs.

Should I include a tree bed in the lawn area?

Measure only the grass and any sections that will receive new sod. Measure a ring or bed separately so it can be subtracted.

A free on-site estimate

Look at the lawn before ordering.

We’ll discuss how much old turf must come out, the soil you have and where the new lawn should meet existing beds and walks.